七麦数据

This app requires some hardware to work:
- OBDLink MX+ bluetooth adapter, or S3XY Commander
- An adapter cable between the OBDLink and your car
Information and links are integrated in the app (Welcome pages) and in our home page, scanmytesla.com

This app connects to your car's CAN-bus, and can read lots of interesting and entertaining information such as temperatures, motor torque, battery power and capacity, and much much more.

This app is not affiliated with Tesla Inc.

Most CANBUS packets decoded by Jason Hughes (skie.net)
Battery cell info decoded by Jack Rickard (evtv.me)
DC/AC Charge counters publicized by "DB 2"
HVAC controls by Marc Olivier Chouinard (teslalog.com)
Trip recording system idea by Marc Olivier Chouinard (teslalog.com)

Model 3 decoding community led by Josh Wardell on https://teslaownersonline.com/threads/diagnostic-port-and-data-access.7502/

Disclaimer

This software is not affiliated with Tesla Inc.

Information shown in this app was not meant for the public and may be inaccurate, subject to change or disappear as the car gets software updates. This information is presented for entertainment purposes, and for learning more about how your car works. The app can stop working at any time due to firmware changes in the car, or for other technical or legal reasons

The information contained on Scan My Tesla mobile app (the "Service") is for general information purposes only.

Amund Børsand assumes no responsibility for errors or omissions in the contents on the Service.

In no event shall be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of the Service or the contents of the Service. Amund Børsand reserves the right to make additions, deletions, or modification to the contents on the Service at any time without prior notice.

This Disclaimer is licensed by TermsFeed Generator.

This app requires some hardware to work:
- OBDLink MX+ (note the plus, the others are not supported by Apple) bluetooth adapter
- An adapter cable between the OBDLink and your car
Information and links are integrated in the app (Welcome pages) and in our home page, scanmytesla.com

This app connects to your car's CAN-bus, and can read lots of interesting and entertaining information such as temperatures, motor torque, battery power and capacity, and much much more.

This app is not affiliated with Tesla Inc.

Most CANBUS packets decoded by Jason Hughes (skie.net)
Battery cell info decoded by Jack Rickard (evtv.me)
DC/AC Charge counters publicized by "DB 2"
HVAC controls by Marc Olivier Chouinard (teslalog.com)
Trip recording system idea by Marc Olivier Chouinard (teslalog.com)

Model 3 decoding community led by Josh Wardell on https://teslaownersonline.com/threads/diagnostic-port-and-data-access.7502/

Disclaimer

This software is not affiliated with Tesla Inc.

Information shown in this app was not meant for the public and may be inaccurate, subject to change or disappear as the car gets software updates. This information is presented for entertainment purposes, and for learning more about how your car works. The app can stop working at any time due to firmware changes in the car, or for other technical or legal reasons

The information contained on Scan My Tesla mobile app (the "Service") is for general information purposes only.

Amund Børsand assumes no responsibility for errors or omissions in the contents on the Service.

In no event shall be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of the Service or the contents of the Service. Amund Børsand reserves the right to make additions, deletions, or modification to the contents on the Service at any time without prior notice.

This Disclaimer is licensed by TermsFeed Generator.

This app requires some hardware to work:
- OBDLink MX+ (note the plus, the others are not supported by Apple) bluetooth adapter
- An adapter cable between the OBDLink and your car
Information and links are integrated in the app (Welcome pages) and in our home page, scanmytesla.com

This app connects to your car's CAN-bus, and can read lots of interesting and entertaining information such as temperatures, motor torque, battery power and capacity, and much much more.

This app is not affiliated with Tesla Inc.

Most CANBUS packets decoded by Jason Hughes (skie.net)
Battery cell info decoded by Jack Rickard (evtv.me)
DC/AC Charge counters publicized by "DB 2"
HVAC controls by Marc Olivier Chouinard (teslalog.com)
Trip recording system idea by Marc Olivier Chouinard (teslalog.com)

Model 3 decoding community led by Josh Wardell on https://teslaownersonline.com/threads/diagnostic-port-and-data-access.7502/

Disclaimer

This software is not affiliated with Tesla Inc.

Information shown in this app was not meant for the public and may be inaccurate, subject to change or disappear as the car gets software updates. This information is presented for entertainment purposes, and for learning more about how your car works. The app can stop working at any time due to firmware changes in the car, or for other technical or legal reasons

The information contained on Scan My Tesla mobile app (the "Service") is for general information purposes only.

Amund Børsand assumes no responsibility for errors or omissions in the contents on the Service.

In no event shall be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of the Service or the contents of the Service. Amund Børsand reserves the right to make additions, deletions, or modification to the contents on the Service at any time without prior notice.

This Disclaimer is licensed by TermsFeed Generator.

This app requires some hardware to work:
- OBDLink MX+ (note the plus, the others are not supported by Apple) bluetooth adapter
- An adapter cable between the OBDLink and your car
Information and links are integrated in the app (Welcome pages) and in our home page, scanmytesla.com

This app connects to your car's CAN-bus, and can read lots of interesting and entertaining information such as temperatures, motor torque, battery power and capacity, and much much more.

This app is not affiliated with Tesla Inc.

Most CANBUS packets decoded by Jason Hughes (skie.net)
Battery cell info decoded by Jack Rickard (evtv.me)
DC/AC Charge counters publicized by "DB 2"
HVAC controls by Marc Olivier Chouinard (teslalog.com)
Trip recording system idea by Marc Olivier Chouinard (teslalog.com)

Model 3 decoding community led by Josh Wardell on https://teslaownersonline.com/threads/diagnostic-port-and-data-access.7502/

Disclaimer

This software is not affiliated with Tesla Inc.

Information shown in this app was not meant for the public and may be inaccurate, subject to change or disappear as the car gets software updates. This information is presented for entertainment purposes, and for learning more about how your car works. The app can stop working at any time due to firmware changes in the car, or for other technical or legal reasons

The information contained on Scan My Tesla mobile app (the "Service") is for general information purposes only.

Amund Børsand assumes no responsibility for errors or omissions in the contents on the Service.

In no event shall be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of the Service or the contents of the Service. Amund Børsand reserves the right to make additions, deletions, or modification to the contents on the Service at any time without prior notice.

This Disclaimer is licensed by TermsFeed Generator.

This app requires some hardware to work:
- OBDLink MX+ (note the plus, the others are not supported by Apple) bluetooth adapter
- An adapter cable between the OBDLink and your car
Information and links are integrated in the app (Welcome pages) and in our home page, scanmytesla.com

This app connects to your car's CAN-bus, and can read lots of interesting and entertaining information such as temperatures, motor torque, battery power and capacity, and much much more.

This app is not affiliated with Tesla Inc.

Most CANBUS packets decoded by Jason Hughes (skie.net)
Battery cell info decoded by Jack Rickard (evtv.me)
DC/AC Charge counters publicized by "DB 2"
HVAC controls by Marc Olivier Chouinard (teslalog.com)
Trip recording system idea by Marc Olivier Chouinard (teslalog.com)

Model 3 decoding community led by Josh Wardell on https://teslaownersonline.com/threads/diagnostic-port-and-data-access.7502/

Disclaimer

This software is not affiliated with Tesla Inc.

Information shown in this app was not meant for the public and may be inaccurate, subject to change or disappear as the car gets software updates. This information is presented for entertainment purposes, and for learning more about how your car works. The app can stop working at any time due to firmware changes in the car, or for other technical or legal reasons

The information contained on Scan My Tesla mobile app (the "Service") is for general information purposes only.

Amund Børsand assumes no responsibility for errors or omissions in the contents on the Service.

In no event shall be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of the Service or the contents of the Service. Amund Børsand reserves the right to make additions, deletions, or modification to the contents on the Service at any time without prior notice.

This Disclaimer is licensed by TermsFeed Generator.

This app requires some hardware to work:
- OBDLink MX+ (note the plus, the others are not supported by Apple) bluetooth adapter
- An adapter cable between the OBDLink and your car
Information and links are integrated in the app (Welcome pages) and in our home page, scanmytesla.com

This app connects to your car's CAN-bus, and can read lots of interesting and entertaining information such as temperatures, motor torque, battery power and capacity, and much much more.

This app is not affiliated with Tesla Inc.

Most CANBUS packets decoded by Jason Hughes (skie.net)
Battery cell info decoded by Jack Rickard (evtv.me)
DC/AC Charge counters publicized by "DB 2"
HVAC controls by Marc Olivier Chouinard (teslalog.com)
Trip recording system idea by Marc Olivier Chouinard (teslalog.com)

Model 3 decoding community led by Josh Wardell on https://teslaownersonline.com/threads/diagnostic-port-and-data-access.7502/

Disclaimer

This software is not affiliated with Tesla Inc.

Information shown in this app was not meant for the public and may be inaccurate, subject to change or disappear as the car gets software updates. This information is presented for entertainment purposes, and for learning more about how your car works. The app can stop working at any time due to firmware changes in the car, or for other technical or legal reasons

The information contained on Scan My Tesla mobile app (the "Service") is for general information purposes only.

Amund Børsand assumes no responsibility for errors or omissions in the contents on the Service.

In no event shall be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of the Service or the contents of the Service. Amund Børsand reserves the right to make additions, deletions, or modification to the contents on the Service at any time without prior notice.

This Disclaimer is licensed by TermsFeed Generator.

This app requires some hardware to work:
- OBDLink MX+ (note the plus, the others are not supported by Apple) bluetooth adapter
- An adapter cable between the OBDLink and your car
Information and links are integrated in the app (Welcome pages) and in our home page, scanmytesla.com

This app connects to your car's CAN-bus, and can read lots of interesting and entertaining information such as temperatures, motor torque, battery power and capacity, and much much more.

This app is not affiliated with Tesla Inc.

Most CANBUS packets decoded by Jason Hughes (skie.net)
Battery cell info decoded by Jack Rickard (evtv.me)
DC/AC Charge counters publicized by "DB 2"
HVAC controls by Marc Olivier Chouinard (teslalog.com)
Trip recording system idea by Marc Olivier Chouinard (teslalog.com)

Model 3 decoding community led by Josh Wardell on https://teslaownersonline.com/threads/diagnostic-port-and-data-access.7502/

Disclaimer

This software is not affiliated with Tesla Inc.

Information shown in this app was not meant for the public and may be inaccurate, subject to change or disappear as the car gets software updates. This information is presented for entertainment purposes, and for learning more about how your car works. The app can stop working at any time due to firmware changes in the car, or for other technical or legal reasons

The information contained on Scan My Tesla mobile app (the "Service") is for general information purposes only.

Amund Børsand assumes no responsibility for errors or omissions in the contents on the Service.

In no event shall be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of the Service or the contents of the Service. Amund Børsand reserves the right to make additions, deletions, or modification to the contents on the Service at any time without prior notice.

This Disclaimer is licensed by TermsFeed Generator.

This app requires some hardware to work:
- OBDLink MX+ (note the plus, the others are not supported by Apple) bluetooth adapter
- An adapter cable between the OBDLink and your car
Information and links are integrated in the app (Welcome pages) and in our home page, scanmytesla.com

This app connects to your car's CAN-bus, and can read lots of interesting and entertaining information such as temperatures, motor torque, battery power and capacity, and much much more.

This app is not affiliated with Tesla Inc.

Most CANBUS packets decoded by Jason Hughes (skie.net)
Battery cell info decoded by Jack Rickard (evtv.me)
DC/AC Charge counters publicized by "DB 2"
HVAC controls by Marc Olivier Chouinard (teslalog.com)
Trip recording system idea by Marc Olivier Chouinard (teslalog.com)

Model 3 decoding community led by Josh Wardell on https://teslaownersonline.com/threads/diagnostic-port-and-data-access.7502/

Disclaimer

This software is not affiliated with Tesla Inc.

Information shown in this app was not meant for the public and may be inaccurate, subject to change or disappear as the car gets software updates. This information is presented for entertainment purposes, and for learning more about how your car works. The app can stop working at any time due to firmware changes in the car, or for other technical or legal reasons

The information contained on Scan My Tesla mobile app (the "Service") is for general information purposes only.

Amund Børsand assumes no responsibility for errors or omissions in the contents on the Service.

In no event shall be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of the Service or the contents of the Service. Amund Børsand reserves the right to make additions, deletions, or modification to the contents on the Service at any time without prior notice.

This Disclaimer is licensed by TermsFeed Generator.

This app requires some hardware to work:
- OBDLink MX+ (note the plus, the others are not supported by Apple) bluetooth adapter
- An adapter cable between the OBDLink and your car
Information and links are integrated in the app (Settings -> Welcome pages)

Cool real-time dashboards for your Tesla!
This app connects to your car's CAN-bus, and can read lots of interesting and entertaining information such as temperatures, motor torque, battery power and capacity etc.

This app requires some hardware to work:
- OBDLink MX+ (note the plus, the others are not supported by Apple) bluetooth adapter
- An adapter cable between the OBDLink and your car
Information and links are integrated in the app (Settings -> Welcome pages)

Cool real-time dashboards for your Tesla!
This app connects to your car's CAN-bus, and can read lots of interesting and entertaining information such as temperatures, motor torque, battery power and capacity etc.