关联应用
LadderTouchLite
graphical programming language
开发者: Motonari Hibi
中国
版本统计
268天4小时
最新版本上线距今
1
近1年版本更新次数
2010-12-06
全球最早版本上线日期
版本记录
版本: 2.1.0
版本更新日期
2024-03-04
LadderTouchLite
graphical programming language
更新日志
I have updated the introduction section of other apps as the number of apps has increased.应用描述
LadderTouchLite is an app to learn the basics of ladder logic, which is a graphical programming language.
This app has two functions.
You can learn about that mechanism by executing some of the prepared samples. And you can check your understanding with questions.
-------Difference from the full version-------
It doesn't show hints of questions.
You cannot make your own ladders.
---------------ELEMENTS---------------
Input(yellow)
Up to 5 elements.
You can control the input signal by tapping the buttons at the bottom of the display.
Virtual output(red)
Up to 5 elements.
Internal memory(gray)
Up to 20 elements.
Virtual output(red) and internal memory(gray) are the same for logical behavior.
But the difference is in usage.
The virtual output is the last element in the ladder logic chain.
The Internal memory is for the processing element of the ladder logic chain.
These are an imitation of the actual ladder logic with the output devices.
Timer(blue)
Up to 5 elements.
The timer can be set from 0.1 seconds to 10.0 seconds. The setting unit is 0.1 second.
The timer works only 'on delay'. This app does not include 'off delay'.
On Delay.
---++++++++++ source
-------++++++ destination
Off Delay.
+++---------- source
++++++++----- destination
+ ON
- OFF
Time flows from left to right
Counter(green)
Up to 5 elements.
You can set from 1 to 50.
There is no counter reset element in this app. Many other ladder logic software has it.
The way to reset the counter is to stop running the ladder.
All elements can be inverse in the source area.
However, timers and counters cannot do it in the destination area.
It is difficult to understand the inverse logic of a timer and counter in the destination area.
--------------Other--------------
There is no function that connects to outer devices.版本: 2.0.0
版本更新日期
2023-03-20
LadderTouchLite
graphical programming language
更新日志
New data format.
Please contact us on Twitter @samekard if you have any problems.应用描述
LadderTouchLite is an app to learn the basics of ladder logic, which is a graphical programming language.
This app has two functions.
You can learn about that mechanism by executing some of the prepared samples. And you can check your understanding with questions.
-------Difference from the full version-------
It doesn't show hints of questions.
You cannot make your own ladders.
---------------ELEMENTS---------------
Input(yellow)
Up to 5 elements.
You can control the input signal by tapping the buttons at the bottom of the display.
Virtual output(red)
Up to 5 elements.
Internal memory(gray)
Up to 20 elements.
Virtual output(red) and internal memory(gray) are the same for logical behavior.
But the difference is in usage.
The virtual output is the last element in the ladder logic chain.
The Internal memory is for the processing element of the ladder logic chain.
These are an imitation of the actual ladder logic with the output devices.
Timer(blue)
Up to 5 elements.
The timer can be set from 0.1 seconds to 10.0 seconds. The setting unit is 0.1 second.
The timer works only 'on delay'. This app does not include 'off delay'.
On Delay.
---++++++++++ source
-------++++++ destination
Off Delay.
+++---------- source
++++++++----- destination
+ ON
- OFF
Time flows from left to right
Counter(green)
Up to 5 elements.
You can set from 1 to 50.
There is no counter reset element in this app. Many other ladder logic software has it.
The way to reset the counter is to stop running the ladder.
All elements can be inverse in the source area.
However, timers and counters cannot do it in the destination area.
It is difficult to understand the inverse logic of a timer and counter in the destination area.
--------------Other--------------
There is no function that connects to outer devices.版本: 1.9.1
版本更新日期
2020-09-12
LadderTouchLite
graphical programming language
更新日志
Fixed the link for the new app Kyotsu Test ProbabilityPlayer.应用描述
LadderTouchLite is an app to learn the basics of ladder logic, which is a graphical programming language.
This app has two functions.
You can learn about that mechanism by executing some of the prepared samples. And you can check your understanding with questions.
-------Difference from the full version-------
It doesn't show hints of questions.
You cannot make your own ladders.
---------------ELEMENTS---------------
Input(yellow)
Up to 5 elements.
You can control the input signal by tapping the buttons at the bottom of the display.
Virtual output(red)
Up to 5 elements.
Internal memory(gray)
Up to 20 elements.
Virtual output(red) and internal memory(gray) are the same for logical behavior.
But the difference is in usage.
The virtual output is the last element in the ladder logic chain.
The Internal memory is for the processing element of the ladder logic chain.
These are an imitation of the actual ladder logic with the output devices.
Timer(blue)
Up to 5 elements.
The timer can be set from 0.1 seconds to 10.0 seconds. The setting unit is 0.1 second.
The timer works only 'on delay'. This app does not include 'off delay'.
On Delay.
---++++++++++ source
-------++++++ destination
Off Delay.
+++---------- source
++++++++----- destination
+ ON
- OFF
Time flows from left to right
Counter(green)
Up to 5 elements.
You can set from 1 to 50.
There is no counter reset element in this app. Many other ladder logic software has it.
The way to reset the counter is to stop running the ladder.
All elements can be inverse in the source area.
However, timers and counters cannot do it in the destination area.
It is difficult to understand the inverse logic of a timer and counter in the destination area.
--------------Other--------------
There is no function that connects to outer devices.版本: 1.9.0
版本更新日期
2020-09-10
LadderTouchLite
graphical programming language
更新日志
Added the commentary "Why do coils have a inverse function?".
New app Kyotsu Test ProbabilityPlayer was added to other apps.应用描述
LadderTouchLite is an app to learn the basics of ladder logic, which is a graphical programming language.
This app has two functions.
You can learn about that mechanism by executing some of the prepared samples. And you can check your understanding with questions.
-------Difference from the full version-------
It doesn't show hints of questions.
You cannot make your own ladders.
---------------ELEMENTS---------------
Input(yellow)
Up to 5 elements.
You can control the input signal by tapping the buttons at the bottom of the display.
Virtual output(red)
Up to 5 elements.
Internal memory(gray)
Up to 20 elements.
Virtual output(red) and internal memory(gray) are the same for logical behavior.
But the difference is in usage.
The virtual output is the last element in the ladder logic chain.
The Internal memory is for the processing element of the ladder logic chain.
These are an imitation of the actual ladder logic with the output devices.
Timer(blue)
Up to 5 elements.
The timer can be set from 0.1 seconds to 10.0 seconds. The setting unit is 0.1 second.
The timer works only 'on delay'. This app does not include 'off delay'.
On Delay.
---++++++++++ source
-------++++++ destination
Off Delay.
+++---------- source
++++++++----- destination
+ ON
- OFF
Time flows from left to right
Counter(green)
Up to 5 elements.
You can set from 1 to 50.
There is no counter reset element in this app. Many other ladder logic software has it.
The way to reset the counter is to stop running the ladder.
All elements can be inverse in the source area.
However, timers and counters cannot do it in the destination area.
It is difficult to understand the inverse logic of a timer and counter in the destination area.
--------------Other--------------
There is no function that connects to outer devices.版本: 1.8.8
版本更新日期
2020-05-26
LadderTouchLite
graphical programming language
更新日志
Minor bug fix应用描述
LadderTouchLite is an app to learn the basics of ladder logic, which is a graphical programming language.
This app has two functions.
You can learn about that mechanism by executing some of the prepared samples. And you can check your understanding with questions.
-------Difference from the full version-------
It doesn't show hints of questions.
You cannot make your own ladders.
---------------ELEMENTS---------------
Input(yellow)
Up to 5 elements.
You can control the input signal by tapping the buttons at the bottom of the display.
Virtual output(red)
Up to 5 elements.
Internal memory(gray)
Up to 20 elements.
Virtual output(red) and internal memory(gray) are the same for logical behavior.
But the difference is in usage.
The virtual output is the last element in the ladder logic chain.
The Internal memory is for the processing element of the ladder logic chain.
These are an imitation of the actual ladder logic with the output devices.
Timer(blue)
Up to 5 elements.
The timer can be set from 0.1 seconds to 10.0 seconds. The setting unit is 0.1 second.
The timer works only 'on delay'. This app does not include 'off delay'.
On Delay.
---++++++++++ source
-------++++++ destination
Off Delay.
+++---------- source
++++++++----- destination
+ ON
- OFF
Time flows from left to right
Counter(green)
Up to 5 elements.
You can set from 1 to 50.
There is no counter reset element in this app. Many other ladder logic software has it.
The way to reset the counter is to stop running the ladder.
All elements can be inverse in the source area.
However, timers and counters cannot do it in the destination area.
It is difficult to understand the inverse logic of a timer and counter in the destination area.
--------------Other--------------
There is no function that connects to outer devices.版本: 1.8.7
版本更新日期
2020-05-17
LadderTouchLite
graphical programming language
更新日志
The puzzle app TapAllBalls has been released, so I added it to the other apps page.
Dark mode support.
Support for iPad Split View.应用描述
LadderTouchLite is an app to learn the basics of ladder logic, which is a graphical programming language.
This app has two functions.
You can learn about that mechanism by executing some of the prepared samples. And you can check your understanding with questions.
-------Difference from the full version-------
It doesn't show hints of questions.
You cannot make your own ladders.
---------------ELEMENTS---------------
Input(yellow)
Up to 5 elements.
You can control the input signal by tapping the buttons at the bottom of the display.
Virtual output(red)
Up to 5 elements.
Internal memory(gray)
Up to 20 elements.
Virtual output(red) and internal memory(gray) are the same for logical behavior.
But the difference is in usage.
The virtual output is the last element in the ladder logic chain.
The Internal memory is for the processing element of the ladder logic chain.
These are an imitation of the actual ladder logic with the output devices.
Timer(blue)
Up to 5 elements.
The timer can be set from 0.1 seconds to 10.0 seconds. The setting unit is 0.1 second.
The timer works only 'on delay'. This app does not include 'off delay'.
On Delay.
---++++++++++ source
-------++++++ destination
Off Delay.
+++---------- source
++++++++----- destination
+ ON
- OFF
Time flows from left to right
Counter(green)
Up to 5 elements.
You can set from 1 to 50.
There is no counter reset element in this app. Many other ladder logic software has it.
The way to reset the counter is to stop running the ladder.
All elements can be inverse in the source area.
However, timers and counters cannot do it in the destination area.
It is difficult to understand the inverse logic of a timer and counter in the destination area.
--------------Other--------------
There is no function that connects to outer devices.版本: 1.8.6
版本更新日期
2020-05-01
LadderTouchLite
graphical programming language
更新日志
The category has been changed.应用描述
LadderTouchLite is an app to learn the basics of ladder logic, which is a graphical programming language.
This app has two functions.
You can learn about that mechanism by executing some of the prepared samples. And you can check your understanding with questions.
-------Difference from the full version-------
It doesn't show hints of questions.
You cannot make your own ladders.
---------------ELEMENTS---------------
Input(yellow)
Up to 5 elements.
You can control the input signal by tapping the buttons at the bottom of the display.
Virtual output(red)
Up to 5 elements.
Internal memory(gray)
Up to 20 elements.
Virtual output(red) and internal memory(gray) are the same for logical behavior.
But the difference is in usage.
The virtual output is the last element in the ladder logic chain.
The Internal memory is for the processing element of the ladder logic chain.
These are an imitation of the actual ladder logic with the output devices.
Timer(blue)
Up to 5 elements.
The timer can be set from 0.1 seconds to 10.0 seconds. The setting unit is 0.1 second.
The timer works only 'on delay'. This app does not include 'off delay'.
On Delay.
---++++++++++ source
-------++++++ destination
Off Delay.
+++---------- source
++++++++----- destination
+ ON
- OFF
Time flows from left to right
Counter(green)
Up to 5 elements.
You can set from 1 to 50.
There is no counter reset element in this app. Many other ladder logic software has it.
The way to reset the counter is to stop running the ladder.
All elements can be inverse in the source area.
However, timers and counters cannot do it in the destination area.
It is difficult to understand the inverse logic of a timer and counter in the destination area.
--------------Other--------------
There is no function that connects to outer devices.版本: 1.8.5
版本更新日期
2020-02-20
LadderTouchLite
graphical programming language
更新日志
Suspend dark mode support应用描述
LadderTouchLite is an app to learn the basics of ladder logic, which is a graphical programming language.
This app has two functions.
You can learn about that mechanism by executing some of the prepared samples. And you can check your understanding with questions.
-------Difference from the full version-------
It doesn't show hints of questions.
You cannot make your own ladders.
---------------ELEMENTS---------------
Input(yellow)
Up to 5 elements.
You can control the input signal by tapping the buttons at the bottom of the display.
Virtual output(red)
Up to 5 elements.
Internal memory(gray)
Up to 20 elements.
Virtual output(red) and internal memory(gray) are the same for logical behavior.
But the difference is in usage.
The virtual output is the last element in the ladder logic chain.
The Internal memory is for the processing element of the ladder logic chain.
These are an imitation of the actual ladder logic with the output devices.
Timer(blue)
Up to 5 elements.
The timer can be set from 0.1 seconds to 10.0 seconds. The setting unit is 0.1 second.
The timer works only 'on delay'. This app does not include 'off delay'.
On Delay.
---++++++++++ source
-------++++++ destination
Off Delay.
+++---------- source
++++++++----- destination
+ ON
- OFF
Time flows from left to right
Counter(green)
Up to 5 elements.
You can set from 1 to 50.
There is no counter reset element in this app. Many other ladder logic software has it.
The way to reset the counter is to stop running the ladder.
All elements can be inverse in the source area.
However, timers and counters cannot do it in the destination area.
It is difficult to understand the inverse logic of a timer and counter in the destination area.
--------------Other--------------
There is no function that connects to outer devices.版本: 1.8.4
版本更新日期
2020-01-30
LadderTouchLite
graphical programming language
更新日志
Fixed behavior when returning from the App Store应用描述
LadderTouchLite is an app to learn the basics of ladder logic, which is a graphical programming language.
This app has two functions.
You can learn about that mechanism by executing some of the prepared samples. And you can check your understanding with questions.
-------Difference from the full version-------
It doesn't show hints of questions.
You cannot make your own ladders.
---------------ELEMENTS---------------
Input(yellow)
Up to 5 elements.
You can control the input signal by tapping the buttons at the bottom of the display.
Virtual output(red)
Up to 5 elements.
Internal memory(gray)
Up to 20 elements.
Virtual output(red) and internal memory(gray) are the same for logical behavior.
But the difference is in usage.
The virtual output is the last element in the ladder logic chain.
The Internal memory is for the processing element of the ladder logic chain.
These are an imitation of the actual ladder logic with the output devices.
Timer(blue)
Up to 5 elements.
The timer can be set from 0.1 seconds to 10.0 seconds. The setting unit is 0.1 second.
The timer works only 'on delay'. This app does not include 'off delay'.
On Delay.
---++++++++++ source
-------++++++ destination
Off Delay.
+++---------- source
++++++++----- destination
+ ON
- OFF
Time flows from left to right
Counter(green)
Up to 5 elements.
You can set from 1 to 50.
There is no counter reset element in this app. Many other ladder logic software has it.
The way to reset the counter is to stop running the ladder.
All elements can be inverse in the source area.
However, timers and counters cannot do it in the destination area.
It is difficult to understand the inverse logic of a timer and counter in the destination area.
--------------Other--------------
There is no function that connects to outer devices.版本: 1.8.3
版本更新日期
2019-05-04
LadderTouchLite
graphical programming language
更新日志
A new app is out, so add it to the Store page.应用描述
LadderTouchLite is an app to learn the basics of ladder logic, which is a graphical programming language.
This app has two functions.
You can learn about that mechanism by executing some of the prepared samples. And you can check your understanding with questions.
-------Difference from the full version-------
It doesn't show hints of questions.
You cannot make your own ladders.
---------------ELEMENTS---------------
Input(yellow)
Up to 5 elements.
You can control the input signal by tapping the buttons at the bottom of the display.
Virtual output(red)
Up to 5 elements.
Internal memory(gray)
Up to 20 elements.
Virtual output(red) and internal memory(gray) are the same for logical behavior.
But the difference is in usage.
The virtual output is the last element in the ladder logic chain.
The Internal memory is for the processing element of the ladder logic chain.
These are an imitation of the actual ladder logic with the output devices.
Timer(blue)
Up to 5 elements.
The timer can be set from 0.1 seconds to 10.0 seconds. The setting unit is 0.1 second.
The timer works only 'on delay'. This app does not include 'off delay'.
On Delay.
---++++++++++ source
-------++++++ destination
Off Delay.
+++---------- source
++++++++----- destination
+ ON
- OFF
Time flows from left to right
Counter(green)
Up to 5 elements.
You can set from 1 to 50.
There is no counter reset element in this app. Many other ladder logic software has it.
The way to reset the counter is to stop running the ladder.
All elements can be inverse in the source area.
However, timers and counters cannot do it in the destination area.
It is difficult to understand the inverse logic of a timer and counter in the destination area.
--------------Other--------------
There is no function that connects to outer devices.
微信公众号
七麦数据公众号
七麦研究院公众号
APP下载
- IOS
- Android
@2014-2022 qimai.cn，北京七麦科技股份有限公司 All Rights Reserved. 京ICP备14049953号
京公网安备 11010502041000号
